The AF M12.14 bit is an amplifier with integrated DSP, equipped with 12 high power amplified channels settable in bridge mode and 2 pre-amplified outputs, to reach a total of 14 output channels. It features 8 analog inputs of PRE IN type (Lo-Level), 8 analog inputs of SPEAKER IN type (Hi-Level) and 1 S/PDIF digital optical input.
Through accessory modules it is possible to increase the number of inputs:
￭ F4IN– adds 4 analog SPEAKER IN input channels;
￭ F2O– adds 2 digital inputs: digital optical S/PDIF or digital electrical S/PDIF, selectable by a dedicated switch on the module.
Equipped with a high-performance 32-bit digital signal processor (DSP) clocked at 147 MHz and 24-bit AD and DA converters, it allows to maximize the acoustic performances of your Car Audio system.
Each output channel features:
￭ adjustable Graphic/Parametric equalizer with 15 poles;
￭ electronic crossover adjustable in 1Hz steps, with Butterworth / Linkwitz / Bessel / Chebyshev / QLP filters and slopes from 6 to 48 dB;
￭ digital control of time delays.
Each input channel features:
￭ adjustable Parametric equalizer with 12 poles;
￭ digital control of time delays.
The AF M12.14 bit is compatible with the remote controller DRC AC, which allows to controls the main system functions (Master volume, Sub volume, source change, memory change, enable/disable Final tuning EQ) without using a PC.
The AF M12.14 bit can be interfaced to any standard system, even on cars equipped with an integrated audio processor, thanks to the automatic de-equalization feature that analyzes and provides a flat signal from the car audio source.
The native Maestro port ensures the interfacing with devices equipped with the Maestro/ADC protocol, which makes this product unique in its category and ready to install also in those vehicles with the most advanced infotainment systems.
WARNING: 1. A PC provided with Windows 10, Windows 11 operating system, 1.5 GHz minimum processor speed, 2 GB RAM minimum RAM and a 1024 x 768 pixels minimum resolution graphics card as well as at least 512 MB of available hard-disk space are required to install the software and setup the product.
2. Before connecting the product, carefully read this manual. Improper connections may cause damage to AF M5.11 bit or to the speakers in your car audio system.