1. bit One HD Virtuoso functioning problems
- If, while tuning the system with a laptop PC connected to the bit One HD Virtuoso, should present any functioning problems, try to disconnect the laptop PC power supply cable. In this way, with the laptop PC working on battery power, a possible voltage difference in the USB ground connection between the car (bit One HD Virtuoso) and ground (PC) can be avoided.
2. bit One HD Virtuoso does not connect to PC software
- If, while tuning the system with the PC connected to the bit One HD Virtuoso, the device is switched off and then on again, the connection is lost and the software can not “finalize” the selected setup. If you don’t want to lose the modifications and setup previously selected, proceed as follows:
a- save the setup as a file on the PC using the function: FILE / SAVE SETUP;
b- exit the software;
c- turn on the bit One HD Virtuoso;
d- launch the software again;
e- load the setup file again using the function: FILE / LOAD SETUP.
3. bit One HD Virtuoso does not respond
- If, while tuning the system with the PC connected to the bit One HD Virtuoso, the device does not respond, proceed as follows
a- turn the bit One HD Virtuoso off:
- by DRC MP, or
- disconnecting the Remote IN, or
- disconnecting the power supply cable for a few seconds;
b- save the setup as a file on the PC using the function: FILE / SAVE SETUP;
c- exit the software;
d- turn on the bit One HD Virtuoso;
e- launch the software again;
f- load the setup file again using the function: FILE / LOAD SETUP.
4. Settings not saved
- In order to successfully complete the bit One HD Virtuoso setup phase and not lose the settings performed, remember to save the selected settings. Select File from the main software menu via the PC and then choose “Finalize to bit One HD Virtuoso”.