The “Selected Input” window will display the active source during the connection with the PC. Auxiliary sources can be added or removed entering the Config->Auxiliary Inputs menu and selecting the desired source (see section 8.3.3). Once you will have disconnected from the PC, the bit One H D input source can be selected via DRC MP.
Sensitivity: to perform the setting/display of the analog inputs. Click on the icon for the Input Setup.
To perform the sensitivity adjustment, refer to section 8.
To change the input signal levels manually, once the manual calibration has been performed, you have two options:
a) Click on the + 3dB / + 6dB buttons to increase the input signal by 3dB / 6 dB.
b) Select the Link check box, keeping the Ref check active, so as to calibrate the input signal levels.