1. PRE OUT low-level analog signal (4 Volt RMS) (see section 5.7.2)
Ch1 - Ch2 - Ch3 - Ch4 - Ch5 - Ch6 - Ch7 - Ch8 - Ch9 - Ch10 - Ch11 - Ch12 - Ch13
To connect the RCA cables going to the system’s amplifiers.
2. AD Link - OUT digital signal (see section 5.7.1)
S/PDIF standard digital signal (Ch1÷Ch13) to connect amplifiers provided with the specific AD Link input.
AD LINK 1: S/PDIF standard digital signal (Ch1÷Ch8) to connect amplifiers provided with the specific AD Link input.
AD LINK 2: S/PDIF standard digital signal (Ch9÷Ch13) to connect amplifiers provided with the specific AD Link input.
3. AC Link: Connection socket to control the amplifiers provided with AC Link connection (see section 5.7.1).
AC LINK 1: Connection socket to control the amplifiers (Ch1÷Ch8) provided with AC Link connection.
AC LINK 2: Connection socket to control the amplifiers (Ch9÷Ch13) provided with AC Link connection.
Nota: Il segnale Remote Out, è disponibile sulle prese AC LINK 1 / AC LINK 2, ed è attivo verso gli amplificatori che supportano questa funzione (Audison AV Amplifiers con ingressi AV bit In).
4. RVA (Remote Volume Aux):
control signal output to connect to the master source AUX input, to enable the “AIS - Auto Input Switch” function. (see 5.4.3 - 5.6.1, 8.3.5).
