LED POWER: it lights up blue to indicate that the W-DRIVE is turned on.
LED Wi Fi: it lights up green to indicate that the device is in operating mode, indicating its status by flashing:
◼︎ it turns green for about 30 seconds during startup and turns green after successful startup.
◼︎ In AP mode: it flashes green 3 times per second if a computer is connected to its network*.
◼︎ In Station Mode: it flashes once per second if the W-DRIVE is connected to a Wi-Fi network and data transmission is in progress.
*Wi-FI Device: W-Drive
Wi-FI Password: AudisonDrive
ADC: input for ADC to ADC cable (included in the package). This port enables the user to manage the connection to the Bit Drive software and bit AF amplifier.
ETHERNET: to directly connect the W-Drive to your computer/router with an Ethernet cable.
USB: the USB host port used to connect to the Audison AF unit. This port allows the user to manage the connection to the Bit Drive software and AF bit amplifier
RST / RESET: device reset button. By pressing this button for 15 sec. the W-Drive will reset.
POWER: connect the power cable as shown in section 4.1.
4.1 Connections for bench setup.
For further information on setup, see section 5.