L’AF M1.7 bit is a Mono amplifier with 6 DSP OUT pre-amplified outputs to reach a total number of 7 output channels. It features 8 signal inputs, PRE IN (Lo-Level) or SPEAKER IN (Hi-Level); 1 S/PDIF optical digital. Through additional modules:
- F4 IN - to increase up to 12 the master input channels;
- F2O - 2 digital inputs can be added: optical digital S/PDIF or electrical digital S/PDIF.
Equipped with a high-performance 32-bit digital signal processor (DSP) clocked at 147 MHz and 24-bit AD and DA converters, capable of maximizing the acoustic performance of your Car Audio system. Each output channel features: an adjustable Graphic/Parametric equalization group, electronic crossover adjustable in 1Hz steps and Butterworth / Linkwitz / Bessel / Chebyshev / QLP filters with slopes from 6 to 48 dB and a digital time delay line.
There are adjustments that can be selected by the user who can interact with the AF M8.14 bit via the DRC AC remote control device. The AF M8.14 bit can be interfaced to any standard system, even on cars equipped with an integrated audio processor, as thanks to the de-equalization and analysis function the AF M8.14 bit will manage a flat signal from its OEM source. It also ensures interfacing to devices equipped with the Maestro/ADC protocol which makes this product unique in its category.
WARNING:
1. A PC provided with Windows 10, Windows 11 operating system, 1.5 GHz minimum processor speed, 2 GB RAM minimum RAM and a 1024 x 768 pixels minimum resolution graphics card as well as at least 512 MB of available hard-disk space are required to install the software and setup the product.
2. Before connecting the product, carefully read this manual. Improper connections may cause damage to AF M8.14 bit or to the speakers in your car audio system.