1. STREAMING BT MODE
During the use in BT streaming it is possible to use both the RCA stereo outputs and the digital optical SPDIF output.
◼︎Use with Audison Virtuoso or AF bit: in this case the source switch (from Master to Optical when the streaming starts and from Optical to Master when the streaming stops) is managed automatically by the ADC port through the integrated serial protocol. Therefore it is not needed to connect the MASTER EN and AUX SEL cables.
◼︎Use with any device not compatible with the ADC: in this case the the source switch (from Master to Optical when the streaming starts, and from Optical to Master when the streaming stops) can be managed by connecting the MASTER EN and AUX SEL wires of the B-CON and by programming properly the device.
The Absolute Volume mode is available only when the B-CON is connected to an Audison bit One HD Virtuoso or AF bit through the ADC port.
To switch between Absolute Volume ON/OFF and viceversa, follow this procedure:
1) Unpair the B-CON from the mobile device.
2) Turn off the B-CON.
3) Move the dedicated Switch in position Absolute Volume ON or OFF.
4) Turn on the B-CON.
5) Pair the B-CON to the mobile device.
2. PASSTHROUGH MODE
This mode allows to play music files from an external player connected to the B-CON optical input with an optical fiber cable. In this case the B-CON will reproduce exactly the same input signal without any D/A and A/D internal conversion.
Note: in Passthrough mode the RCA stereo output of the B-CON is disabled.
Passthrough is active when:
◼︎The B CON is not paired in Bluetooth to any other device.
◼︎The BCON is paired in Bluetooth with a mobile device, but the streaming is not active (the device is not playing any music file).
Example of Passthrough mode with B-CON connected to an Audison bitDMI and to an AF bit amplifier: